Special products - Special products
EXTREMA
Water-based bicomponent epoxy enamel for indoor use with a very low solvent content, suitable for low-thikness floorings and limited-traffic areas. Rubberized, ideal for masonry, concrete, ceramic tiles and formica. CERTIFIED FOR REFRIGERATORS AND FOOD-STORAGE ROOMS.
Use: exteriors-interiors
Tools: brush-roller
Diluition: with water
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Chart colour - 170...L
Product code: Catalyst - 875170L - CATALIZZATORE PER EXTREMA
Product code: P Pastel - 170250L - P-M Base - 0.720 LITRIDA CATALIZZARE
Product code: D Semitransparent - 170D00L
LINSPORT
Topcoat for tennis courts and playgrounds, with styrol-acrylic resins in water dispersion and ventilated quarz.
Use: exteriors
Tools: brush-roller
Diluition: with water
Spreading Rate: 8-9 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Chart colour - 519...L - MM Tint
Product code: Green - 519278L - Grass Green
Product code: Red - 519228L - Tennis Red
Product code: ED Transparent - 519ED0L
SMALTO PER PISCINE
Chlorinated rubber resins-based enamel for the coating of pools, extremely water-resistant, both to fresh and salt water and to purification additives.
Use: exteriors
Tools: brush-roller
Diluition: chlorinated rubber thinner
Spreading Rate: 14-16 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
STEREOFIX PLUS
Water-based sheath fluid coating, with high elasticity, waterproof and weatherable. Ideal to protect roofs or industrial and construction coverings. Stereofix Plus falls in the COOL ROOF category: these materials are highly sun-reflecting and release heat in form of infra-red radiations, thus considerably reducing the thermal bridge.
Use: exteriors
Tools: brush-roller
Diluition: with water
Spreading Rate: 3-4 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
ALGABLITZ
Additive for emulsion paints, specified-thikness coatings, for outdoor use, resistant to moulds and weeds.
Use: additive
Tools: see technical sheet
Diluition: ready to use
Spreading Rate: 16-18 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
FIX-RUST
Transparent solvent-based rust blocker, with crackle finish.
Use: exteriors-interiors
Tools: brush
Diluition: ready to use
Spreading Rate: 16-20 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
FUGA FIX
Transparent, water-repellent, protective and strengthening, non film-forming solvent-base top coat for indoor use. Ideal to solve the problem of water infiltrations on terraces. It can be used to treat joints in floors, it seals the porosity and protects from rainwater infiltrations.
Use: exteriors
Tools: brush-roller
Diluition: ready to use
Spreading Rate: According to substrate (see technical sheet)
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
OVER-EX LUCIDO
Bicomponent water-based polyurethane finish, transparent protective, for interiors and exteriors. Suitable both for the protection of painted masonry supports and for floor protection. Also suitable for wooden surfaces.
Use: exteriors-interiors
Tools: brush-roller-spray
Diluition: with water
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Transparent - 191500L
OVER-EX OPACO
Bicomponent water-based polyurethane finish, transparent protective, for interiors and exteriors. Suitable both for the protection of painted masonry supports and for floor protection. Also suitable for wooden surfaces.
Use: exteriors-interiors
Tools: brush-roller-spray
Diluition: ready to use
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Transparent - 191700L
PIGMENTS
Pigments for Tinting System All pigments can be used to paint synthetic finishes for interiors. Pigments resistant to UV rays and alkalinity, to be used for the coloring of synthetic products for outdoor use: B - Black, C - Oxide Yellow, D - Ftalo Green, E - Ftalo Blue, F - Oxide Red, I - Oxide Brown, KX - White, LA - Shadow Ground, YG - Yellow, HSE - Red The pigments to be used for the coloring of mineral products SILICATO DI POTASSIO series and SILOSSANICA series are: B - Black, C - Oxide yellow, F - Oxide red, I - Oxide brown, KX - White, LA - Earth Shadow, YG - Yellow, HSE - Red Caution: HSE-YG pigments should only be used for water systems. All the dyes used in the glazes resist outside.
Use: additive
Tools: see technical sheet
Diluition: ready to use
Spreading Rate: According to substrate (see technical sheet)
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Single type - 390001 - AXX ORGANIC YELLOW
Product code: Single type - 390004 - D PHTHALO GREEN
Product code: Single type - 390005 - E PHTHALO BLUE
Product code: Single type - 390002 - B LAMP BLACK
Product code: Single type - 390006 - F RED OXIDE
Product code: Single type - 390008 - KX TITANIUM WHITE
Product code: Single type - 390007 - I BROWN OXIDE
Product code: Single type - 390020 - C YELLLOW OXIDE
Product code: Single type - 390009 - LA RAW UMBER
Product code: Single type - 390013 - YG INORGANIC YELLOW
Product code: Single type - 390018 - HSE ORGANIC RED
Product code: Single type - 390010 - R ORGANIC RED
Product code: Single type - 390011 - T MEDIUM YELLOW
OVER-EX SATIN
Bicomponent water-based polyurethane finish, transparent protective, for interiors and exteriors. Suitable both for the protection of painted masonry supports and for floor protection. Also suitable for wooden surfaces.
Use: exteriors-interiors
Tools: brush-roller-spray
Diluition: with water
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Transparent - 191600L
STEREOFIX
Waterproof, liquid sheath coating, extremely adherent to the substrate, synthetic resins-based for the protection of roofs and coverings. It can be use for the deactivation of asbestos (certificate no.090L from 19/05/2009 issued by GFG Chimica).
Use: exteriors
Tools: brush-roller
Diluition: with water
Spreading Rate: 3 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: White - 641350L - White
Product code: Coloured - 641312L - Gray
Product code: Coloured - 641330L - Black
Product code: Coloured - 641328L - Red
Product code: Coloured - 641225L - Red Tile
INDURIL
Hardner for plastic coatings, acrylic resins-based in water dispersion.
Use: exteriors
Tools: brush-roller
Diluition: with water
Spreading Rate: 10-12 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
MUFFABLITZ
Additive for emulsion paints and plastic materials for indoor use, powerful against moulds.
Use: additive
Tools: see technical sheet
Diluition: ready to use
Spreading Rate: 16-18 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
FZ 2003
Enamels additivated with FZ 2003 can be used as primers or topcoats and directly on iron.
Use: exteriors-interiors
Tools: see technical sheet
Diluition: ready to use
Spreading Rate: 16-18 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
